Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM 3.7 help
- Thread starter 56BelAir
- Start date
curlycord
Programmer
Can a Media Bay Module from a BCM 4.0 system be used on a BCM 3.7 system? Will 4.0 firmware
downloads cause any problems?
The BCM core will check to see if the firmware matches. If it is not a match, it will load the firmware it needs to run that
MBM, even if the firmware is older then what is presently on the MBM. Moving MBM from BCM 3.7 to BCM 4.0 and then
back to BCM 3.7 should not cause any problems.
downloads cause any problems?
The BCM core will check to see if the firmware matches. If it is not a match, it will load the firmware it needs to run that
MBM, even if the firmware is older then what is presently on the MBM. Moving MBM from BCM 3.7 to BCM 4.0 and then
back to BCM 3.7 should not cause any problems.
- Status
Similar threads
- Locked
- Question