BCM 3.7 correcting the time 3

[murphysmom]

Where do I find the datye time parameters

Don't see it listed in the configuration menu

 

[Firebird Scrambler]

Going from memory, it's actually found in the top section with licencing (I think, or one of the other 2 options)

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[cook1082]

Under Identification.

 

[Firebird Scrambler]

Thanks cook1082, I knew it was somewhere in that area.

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[murphysmom]

And where might identification be found?

 

[murphysmom]

Found it

Many Thanks

 

[oldestgeek]

If the BCM is connected to the network, I find it most convenient to set the system to use NTP to maintain the correct time. Just be sure to set the time zone first, and if you're using an ntp server name instead of an IP address insure you have a valid DNS programmed on the BCM. You'll never need to set the time again unless the connection to the server is lost for some reason.