BCM 3.6 Speaking Spanish

[str8shooter]

Hi
On the last two 3.6 2.2c Hard drive failures I have attended, The system cold started the telephony (MSC)and went from English to Spanish while I was running through the Initialization routine on the new hard drives via telnet. I would be very interested to find out if any one else has experienced this problem. Thanks

 

[acewarlock]

What do you mean HD Failures? Did you replace the HD's on them before INI'ing them?




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[str8shooter]

Thanks for the reply. I did replace the hard drives and then initialized them. I have been doing some testing today on the bench and I think what has been happening is part of the ssl certificate issues. The system would start to initialize the drive but then it could not complete the routine because it could not start the apache service. I still dont understand why it would cold start to Spanish on the MSC.

 

[bequi]

I think that you have this problem with the initialization porcess:

http://www.tek-tips.com/viewthread.cfm?qid=1446781

Regards.