BCM 3.6 Problem

[danthephoneman]

Hi All,

Have a problem with a BCM 3.6 that I have not seen yet,all lights on the front of the BCM are flashing, but the voicemail works and telephony is working fine the major problem is you can't login to the system or telnet into it. BFT and MSC were replaced about 2 years ago.whem the system is rebooted it comes back and lights go solid for about a day or so then goes back to flashing and not being able to login.

Anyone seen this?

 

[acewarlock]

I know you said the BFT and MSC where replaced about 2 yrs ago, but what color are the capacitors Green or Blue? just corering all bases.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[danthephoneman]

Blue.

 

[danthephoneman]

Do you think it could just be a bad BFT?

 

[acewarlock]

Not being able to login though UM and and serial port is usually an indication of a bad BFT or MSC and not the HD as you say Vmail and the phones are working.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[danthephoneman]

Thanks, I going to have one of my techs change the BFT first.