In desperate need of any bcm 400 3.5 patches since the Avaya PLDS site has left out this version for download. Does anyone know where they can be aquired? Inter-office dialing between a 3.5 to 4.0. Calling works flawlessly between the 4.0 to 3.5. When a call is made from 3.5 to 4.0 as soon as the caller picks up, the call is terminated. If call isnt answered call goes to voicmail. Ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM 3.5 patches NEEDED!! inter-office dialing 3.5 to 4.0 1
- Thread starter rwf546
- Start date
-
1
- #2
curlycord
Programmer
You need to go to the old ESPL site for the older versions.
See our FAQ's page for list of the latest patches.
You may want to provide full details on how the systems are network.
=----(((((((((()----=
curlycord
Toronto Canada
See our FAQ's page for list of the latest patches.
You may want to provide full details on how the systems are network.
=----(((((((((()----=
curlycord
Toronto Canada
- Thread starter
- #3
When you go to the old ESPL site for BCM's it indicates everything has been migrated to the new PLDS site, not sure if I'm missing something. As far a the network config two seperate locations linked with vpn. Both system dialing plans for the private network are set for CDP and recieve 3 digits. Both have keycodes for VOIp GW Trunks which are part of pool B. NO MCDN keys on either
Site 4.0 192.168.20.x EXT:4xx
destination digits:2 ip:192.168.18.202 GW type:BCM35 GW protocol:CSE Voip protocol:H323
route:2 pool:B DN Type
rivate
destination code:2 route:2 absorb:0
Calls work perfectly from the 4.0 to the 3.5
Site 3.5 192.168.18.x EXT:2xx
destination digits:4 ip:192.168.20.250 GW Type:BCM3.5 GW Protocol:CSE
route:2 pool:B DN Typerivate
destination code:4 route:2 absorb:0
Calls from the 3.5 can be made to the 4.0 if the user doesn't answer call is directed to the appropriate VM. If calls answered the call, call is terminated. In the alarm logs im recieving this error:
Endpoint type does not match configured remote gateway type. Configured=BCM3.5 Actual=BCM3.5 with no repair action. I've never run across this.
Site 4.0 192.168.20.x EXT:4xx
destination digits:2 ip:192.168.18.202 GW type:BCM35 GW protocol:CSE Voip protocol:H323
route:2 pool:B DN Type
rivate destination code:2 route:2 absorb:0
Calls work perfectly from the 4.0 to the 3.5
Site 3.5 192.168.18.x EXT:2xx
destination digits:4 ip:192.168.20.250 GW Type:BCM3.5 GW Protocol:CSE
route:2 pool:B DN Type
rivatedestination code:4 route:2 absorb:0
Calls from the 3.5 can be made to the 4.0 if the user doesn't answer call is directed to the appropriate VM. If calls answered the call, call is terminated. In the alarm logs im recieving this error:
Endpoint type does not match configured remote gateway type. Configured=BCM3.5 Actual=BCM3.5 with no repair action. I've never run across this.
curly, thanks for putting up those lists for the BCM patches. Have a star. ![[thumbsup2]](/data/assets/smilies/thumbsup2.gif "[thumbsup2] [thumbsup2]")
Brian Cox
Georgia Telephone
Brian Cox
Georgia Telephone
curlycord
Programmer
Your welcome and thanks.
rwf546 your right, they must have just done that which is just stupid.
As for the issue I cant help but guess a patch would help.
=----(((((((((()----=
curlycord
Toronto Canada
rwf546 your right, they must have just done that which is just stupid.
As for the issue I cant help but guess a patch would help.
=----(((((((((()----=
curlycord
Toronto Canada
- Status
Similar threads
- Question