BCM 200 4.0 offsite intercom ip call to offsite intercom ip call issue

[Sekin]

Greetings all.

My problem is making a voice call from one offsite ip set to another offsite ip set. You can page, call out receive calls and do every feature except make a call from one ip set to another ip set, there seems to be no voice path. The phone will ring and can be answered but no voice comes through the call. The offsite phones themselves will receive pages and voicemail; just not communicate with another offsite ip set. However if you bring in one of the offsite ip sets and put it on the local network with the BCM 200 then you can place an intercom voice dialed call. Any help would be greatly appreciated!

 

[curlycord]

Suggest you poast in the BCM forum:

http://www.tek-tips.com/threadminder.cfm?pid=1361

Note Release/sotware and latest patch date and also check with the IT dept to make sure they have allowed for voice.


=----(((((((((()----=
curlycord

http://www.curlycord.com