Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 1000 Nic card replacement

Status
Not open for further replies.

MrPana

Technical User
Dec 10, 2008
15
GB
Dose anybody know where to get and/or how to replace the nic card???

Is it a PCI or other???

Mr Pana.
 
I've got a guide for the old BCM 1000 system and it has 4 PCI slots.

• PCI Bus Connectors
The figure below shows the location of the PCI bus connectors. Note the following considerations for the connectors:
o All of the PCI bus connectors are bus master capable.
o PCI bus connector 2 has optional SMBus signals routed to it. This enables PCI bus add-in boards with SMBus support to access sensor data on the board. The specific SMBus signals are as follows:
? The SMBus clock line is connected to pin A40
? The SMBus data line is connected to pin A41


All the best

Firebird Scrambler
Meridian Programmer in the UK

If it's working, then leave it alone!.
 
It's a Netgear FA311 if I remember correctly. Definitely PCI.
 
Meant to say it's a Netgear FA310, not 311.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top