Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 1000 IP Issue

Status
Not open for further replies.

norstarboy125

Vendor
May 23, 2006
1,896
US
Hello All, I installed a BCM 1000 3.7 today and when I changed the IP address from 10.10.10.1 to a valid IP off their network witch was 10.1.10.x it would shut down the internet and I could unplug the BCM from the switch and the users could access the internet again this happen on every IP address that I assigned to the BCM any help would be great.
 
check if you DHCP is enabled on the BCM,might be that users are getting IP address on your BCM and makes that their default gateway
 
I have seen DHCP on the BCM cause such a problem.

SHK Certified (School of Hard Knocks)
 
I know what you guys are saying but that's the first thing that I checked DHCP is disabled...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top