Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 1000 3.6 Power problem

Status
Not open for further replies.

acewarlock

Technical User
Sep 16, 2002
9,370
US
I have a BCM 1000 that only the Power, TEMP and fan green LED's come on and nothing else. I though it might be the Power supply so I changed it, but that didn't make any difference.

When I hook up a monitor to it I don't get any vidio to it.


Any Ideas
 
If the hard drive doesn't spin up, check the system board. I had that happen once on a BCM 1000. It had the infamous green capacitors. None appeared to be leaking, but the system wouldn't even try to come up.
 
The harddrive spins up, i just don't get any LED's.

I have an older BCM 1000 that i'm going to use the motherboard out of and see if that will work.

Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top