Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BayStack450/350/410 Version4.2.0.12

Status
Not open for further replies.

tecci

Technical User
Jan 17, 2002
11
DE
Has anyone infos about this version?
runs this version right good ??
are there any bugs?
i have read the release notes and it sounds quite good
Thanks for infos

 
tecci,


I am running 4.2.0.12 and "I am" having problems.

Firstly, after the upgrade, the FW comes up as 1.48 which is correct, but the SW results in 4.2.0.9 instead of 4.2.0.12.

Secondly, occasionally I cannot browse an NDS tree on a Novell 4.11 network, and I have IP problems such as telnet locking up - although PINGs get through fine. I'm working on the problem and although it may have nothing to do with this new version, the problem only occurred after installing the new switches and code.

-Maj
 
hi tecci,
I'm running now 4.2.0.12 on our 450-24T for at least 2 months. No problems so ever, and we have a quite large network (2x 8606, 42x 450 and 12x BPS2K). Even hybrid stacks with BPS2K under SW:v2.0.5.16 are working fine (don't forget: all must have the same ISVN!!)

Good luck

cstraessle
[sunshine]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top