I have configured the pix 515e inside interface with an IP address 172.20.1.200 255.255.0.0. I have connected to the device through the console port. Anyway I am able to ping the ip address of the inside interface from the pix console but unable to ping any ip from the pix in the same subnet range or can't ping the inside interface from any machine, including the one that is connected to the console port. I am sure there must be a access list to enable icmp and stuff. Please any help will be appreciated. Once I have the ip address set, I want to use the PDM.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Basic Setup Help 515E
- Thread starter daidem77
- Start date
Similar threads
- Locked
- Question
- Locked
- Question