Basic BGP setup

[TillmanZ]

Hi there!

Could anyone help me with some step-by-step instructions on how to setup the following scenario:

Summit48si

Port1 connected to ISP
My address space 123.123.123.0/24 - AS45678
ISPs router: 62.100.100.100/30 - AS1234
My transfer net: 62.100.100.101/30

Port 10-48 VLan "Main"
with 123.123.123.0/24
123.123.123.1 being the DefaultGate(the summit) for stations connected to those ports


When I tried to set it up I always get the "no interface in routing mode" error.

Hope you can help me as I struggle for quite some time now already.


Cheers,

Tillman

 

[TillmanZ]

This is what I have done so far:

create vlan Upstream1
configure Upstream1 add ports 1
configure Upstream1 ipaddress 62.100.100.101/30
enable ipforwarding Upstream1

configure bgp as-number 45678
configure bgp routerid 62.100.100.101
configure bgp add network 123.123.123.0/24
create bgp neighbor 62.100.100.100 remote-as-number 1234
enable bgp neighbor 62.100.100.100
enable bgp


By the way - how would I add a second upstream provider?

 

[ExtremeSE]

What version of code are you running?

 

[TillmanZ]

7.5 something