Basic 911 Setup without special phones

[balad]

I am not sure what to do or how to set this up.

How do I define 911 as a vertual number that will ring two 500 TYPE phones simultaneously? I have a 81c with 3.0. It just isn't comming to me how i should build it. Any prompt nowledge would help imensly.

Thanks.

 

[johnpoole]

very simple if your not using 9 for an access code, if you are you'll need to make 11 a spn, send it to a rlb the delets 2 and inserts xxx xxxx, the 7 digit number of the did's you want to ring, send it to a local route, that will send the number to the co and back.. you can use a new did number and make it a mcr key on two sets, either analog or digital..it is a work around but the only way i know to use the 1st digit 9 for both 911 and 9+plus

john poole
bellsouth business
columbia,sc

 

[balad]

Hey sorry for the late reply, and thanks for the help. I didn't do that though.

What I did was creat a group in LD 18 and then a FFC in LD 57. That works great, in fact perfect. Thanks any ways.