Base Stations

[OmniS3Tech]

We're going to upgrade our dect to intergrated dect, but our Current system has the Old style base stations.

The Question is Can the old base stations be used with integrated Dect, and if So Can the firmware be uploaded (CNBLI) or is the upgrade chip only.

Many thanx in advance
Omni S3 Tech

 

[rfpui]

Hi Omni
This old base station named CORE can be used in integrated dect.
Limitation is that only 6 CORE base station can be connected to ELU31.
If you have WORF (new base station) 8 base can be connected to ELU31

If your old system is GAP you can connect base station to ELU31 if no
You must temporary upgrade old system from A/B mode to GAP and load new soft to base station. It is not possible to load GAP soft to old BS from MD