Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Base Station Unit

Status
Not open for further replies.

04dawmingsu

Vendor
Mar 7, 2007
25
SA
Hi To All...

Theres any one knows about the base station unit that have switch inside to reset it?

Because i have some base station not working its just blinking the top ligths red,and after that its stop then in 1 minute it will blink again the red ligth.plsss help

Alex Miclat
 
Hi,

No switch availability inside the BS... You can do it with command... Need to specify FPI, RPN & choose option Reset in one of the commands...
Are yo sure its the Base station... Try changing the BS & see the result... As far as i see with the info you provided it could be incorrect connectivity from the ELU31.

Cheers,

""The truth about action must be known and the truth of inaction also must be known; even so the truth about prohibited action must be known. For mysterious are the ways of action""
 
Hi

You could do a CXRFI:FPI=....,RPN=....,RESET=YES;
Where FPI is the board refernce you have indicate and RPN is the base station involved.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top