Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Base station & IC-LU Problem
- Thread starter Mouafy
- Start date
nerdherder27
Programmer
the difference of the two positions is that in the 1 takes power from the backplane instead in 2 takes the external power supply.
the choice whether internal or external supply takes place via the dip switch explain in figure.
if you connect the base station into the connector 1 and did not change the internal switch the base station will not turn on.
the choice whether internal or external supply takes place via the dip switch explain in figure.
if you connect the base station into the connector 1 and did not change the internal switch the base station will not turn on.
- Status
Similar threads
