Bandwidth-Managment with Cisco-Switches possible?

[xyCruiseryx]

HI @ all,

is it possible to create a class-map for Bandwidth management on cat3750?

i want to configure the follow:

PC1 and PC2 (10.1.1.1 and 2) on SW1 should get 100% bandwidth traffic from switchport if they connect a destination (2.2.2.2)

BUT

If PC1 and PC2 (10.1.1.1 and 2)connect to destination (3.3.3.3.) the PCs should get 30% bandwidth of traffic from Switch port.


I will use a Cat3750.

Is it possible to create it on this switch.

 

[ADB100]

You can create ingress QoS service-policies on Catalyst 3750 switches, but not egress. You could 'shape' the traffic on egress to ensure one class never consumes more then a configured percentage but that is about it.

Andy

 

[billyj1900]

They using an alternative source like a Packeteer Packet Shaper.