I have a customer that has 3 t1's to the same provider (me) Whats the best way to balance these? the guy before me had duplicate routes to the two original T1's for "balancing" I added a 3rd T1, but in repeating the previous admin's process it brings the connection to a snails pace. As soon as I add the routes pings go from 8ms to 300ms. I am running HDLC, they are coming in on a channelized T3 on a 7200 on my end and a 3640 on their end. There has to be a better way to do this.....
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Balancing 3 t1's
- Thread starter buraglio
- Start date
- Thread starter
- #3
I've been thinking eigrp, our IOS was written specifically for us by Cisco to support an extremely new card we had at the time (about 8 months ago) Unfortunately it will not do ppp. I really should get on them to hack ppp back into it (or make it work rather) but 99% of my customers use cisco so I normally just do HDLC. I've not really used EIGRP, what would it entail?
- Status