Badge Report - Printing Issue

[ltidquist]

I've got a report in CR9 that is a badge report. The badge stock is 4" x 8.5". The printer is an HP Laserjet 4250. I made my report as a one-column report. The problem is this badge stock moves into the printer from the middle of the paper tray (top of tray one). I can't figure out how to make my report work with this kind of paper/paper tray. My report will print on regular paper on the very left of the paper - how do I make this work?

Help! Thanks in advance.

 

[lbass]

Have you tried changing the left margin on the report to something like 4.25"?

-LB

 

[ltidquist]

I have tried that. When I do that it pushes the badge down the page instead of just moving it over.

Thanks.

 

[lbass]

I think you must be adjusting the wrong margin then!
You might want to double check that.

-LB

 

[ltidquist]

BOY do I feel stupid! I was adjusting the top margin. I guess I've been look at this too long.

Thanks for the very obvious answer and sorry to waste your time.

:-0