BackupExec 9.1 problem

[organman]

Hi !
I'm running ver. 9.1 4691 on a Win2k server and use it to backup a Netware 6.5.5 server running Groupwise 6.5.6.
The problem is that when Groupwise is backed up I get his error message:

Unable to initialize Remote Agent[/color red]
Set Information - GRPW.GroupWise System/GRPW.GroupWise System/1[DOM]GRUMSDOM: 1[DOM]GRUMSDOM:

However the data is backed up.

This problem occured after migrating the server to new hardware, it's now running on a DELL PE1950 box with a dualcore CPU.
When doing the migration I also installed support pack 5 for NetWare.

I did not have this problem on the old hardware where I was using Netware 6.5 with support pack 3.

I used to use GWTSA but I have tried with TSAFS /EnableGW=yes and TSAFSGW /HOME-VOL1:\GRUMSDOM /HOME-VOL1:\GRUMSPO
(I'm using both TSAFS and TSAFSGW so I can see the GW objects when creating a backup job)

But the problem is the same.

What could be the problem here ?

 

[organman]

Problem solved !

When I switched from using GWTSA to TSAFS I took the new NLM's from tsa5up19.exe.
But there is a problem with SMDR.NLM so I used SMDR.NLM from tsa5up18.exe instead.
With this version of SMDR everything works fine.

There is a document on Novell's web site that describes this, Document ID 3000544.

 

[LawnBoy]

Glad you got it sorted.