Backup with DUMP --->>

[Mauric]

hello all,

after my machine goes finish with the first configuration step, i want do start a bkup = HP surestore 6000 DDS2 90m with DUMP but i become a short time after start a msg :-(
please can my any body help my

netsun# mt -f /dev/st0 erase

grösse =
/dev/sd0a 69555 37344 28733 56% /

netsun# dump 0dsf 61000 10240 /dev/rst01 /dev/sd0a
DUMP: Found /dev/rsd0a on / in /etc/fstab
DUMP: Date of this level 0 dump: Tue Jul 1 14:29:40 2003
DUMP: Date of last level 0 dump: the epoch
DUMP: Dumping /dev/rsd0a (/) to /dev/rst01
DUMP: Label: none
DUMP: mapping (Pass I) [regular files]
DUMP: mapping (Pass II) [directories]
DUMP: estimated 37961 tape blocks on 0.01 tape(s).
DUMP: Volume 1 started at: Tue Jul 1 14:29:42 2003
DUMP: dumping (Pass III) [directories]
DUMP: dumping (Pass IV) [regular files]
DUMP: End of tape detected
DUMP: Closing /dev/rst01
DUMP: Volume 1 completed at: Tue Jul 1 14:30:27 2003
DUMP: Volume 1 took 0:00:45
DUMP: Volume 1 transfer rate: 716 KB/s
DUMP: Change Volumes: Mount volume #2
>> DUMP: Is the new volume mounted and ready to go?: ("yes" or "no&quot n

netsun# mt -f /dev/st0 status
SCSI tape drive, residual=0
ds=3<Mounted>
er=6<>
blocksize: 0 (0, 0, 0, 0)
density: 36 (0, 0, 0, 0)
current file number: 0
current block number: 0