Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Backup file issue

Status
Not open for further replies.

Tripoth

Technical User
Jun 10, 2002
358
US
Have an older legend at a client's site.
Saved to the spm program a few months ago on my computer just in case.
Just in case has happened, but the file is now an MPM file and the Winspm program does not recognize the file.
Am I out of luck, is there a fix, or did I do an oopsie?

Thank you for any assistance.
 
I don't remember the file format for a Legend backup, but I do know it has to be the same release in order to restore the configuration to a new processor. If not, you need to do a convert to get it to the same release and then restore it.
 
by any chance,
if auto backup to pcm card was in use, you should have two usable restore files.
software versions of replacement processors must match the backup file.


42
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top