Hi,
For reasons of compliance, I run a scheduled report every morning ("Backup Set Details By Resource"). About 20 servers are being backed up, grouped in 5 jobs.
After recently upgrading from 9.1 to 11d, some odd things are happening:
[ul]
[li]The PDF increased from 6 to 12 pages[/li]
[li]The resources are not grouped by server anymore - not properly sorted as well[/li]
[li]Some items are shown under the wrong resource (e.g System States of 7 different servers all show up under 1 server name)[/li]
[li]Some items are shown twice (2 identical lines)[/li]
[/ul]
Things I already tried:
[ul]
[li]Reinstall the server from scratch[/li]
[li]Create my own custom report ... even worse results[/li]
[li]Use an RDL editor to change the reports. This allowed me to change fonts, layout etc - but obviously the problem is in the reporting engine, not in the RDL template.[/li]
[/ul]
Any help or suggestion is ***very*** welcome.
Thanks,
Wim
For reasons of compliance, I run a scheduled report every morning ("Backup Set Details By Resource"). About 20 servers are being backed up, grouped in 5 jobs.
After recently upgrading from 9.1 to 11d, some odd things are happening:
[ul]
[li]The PDF increased from 6 to 12 pages[/li]
[li]The resources are not grouped by server anymore - not properly sorted as well[/li]
[li]Some items are shown under the wrong resource (e.g System States of 7 different servers all show up under 1 server name)[/li]
[li]Some items are shown twice (2 identical lines)[/li]
[/ul]
Things I already tried:
[ul]
[li]Reinstall the server from scratch[/li]
[li]Create my own custom report ... even worse results[/li]
[li]Use an RDL editor to change the reports. This allowed me to change fonts, layout etc - but obviously the problem is in the reporting engine, not in the RDL template.[/li]
[/ul]
Any help or suggestion is ***very*** welcome.
Thanks,
Wim