Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Backup Exec 11 Restore to Different size HD

Status
Not open for further replies.

kevstar

Programmer
Nov 21, 2001
109
GB
Hi there,

I really hope you guys can help me. I have been looking at the Symantec forums all day trying to see if they can help. I have a full backup of my server and due to the fact that I am running out of room on my c:\ partition I want to restore the data to new disks (RAID) and increase the partion size.

I found an article on the Symantec website that says the following...


"The process is on page 183 of the user guide for BESR 2010;
To do the recovery to a larger drive, you simply delete the partition that is automatically defined, select the unpartitioned space to restore into, and use the option to resize the drive after recovery. The resize option is only available on unpartitioned space, that's why you need to delete the defined partition."



However, this is of course for BESR software and not for Backupexec 11.

So my question is, are the procedures for restoring the data onto a bigger drive and changing the drive partion sizes the same and if not, how do I go about doing this in Backupexec 11?

Thanks ever so much for your help

Kev
 
Hey there, hopefully i can point you in the right direction

If you need to swap drives over, hows the existing disks cofigured?

Hardware or Software Raid
Raid 1+0 or Raid 5 etc

What operating system do you plan on doing it on?


Hope to hear from you soon
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top