Backup error messages

[Carlitos71]

I have a NCR 3488 server running SCO Open Server 5.0.6 that runs a nightly backup script. The system is a PIII 800 mhz with 256mb of RAM and a SCSI tape drive. The customer reports that the following error message just started showing up.

WARNING: LSS_SGE on ha=1, dsp=FEBFC6EC dcmd_dbc=781D0000 dsa=FEBFC008 dsps=0000
0000 !!!

It appears the message appears when the backup starts and calls the tape drive. We had the tape drive replaced but are still getting the same message.

Thanks for the help.

 

[stanhubble]

Did anything change recently ? (addition of a device on the same chain?)

are you using the latest slha device driver (for 5.0.6)?

it is just a warning but as tony(pcunix) stated before that the !!! means it really didn't like something but worked anyway.

 

[Carlitos71]

As far as I can tell, nothing changed since the system was first placed at the customer's location.

So, the slha drive is not the latest. I will update that to see what happens.

Must just be a warning, because there have been no problems with the tape backup since it was replaced 5 days ago.

Thanks for the help.