Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Backup 8.6: getting "D:\ is not accessible"

Status
Not open for further replies.
kayjerome

kayjerome

IS-IT--Management
Aug 10, 2003
1
BS
My server (MS2000) crashed and the vendor has to emergency order the motherboard. The part would be in within 5-10 workdays (IBM).
System is a IBM Netfinity with RAID5 drives. In the interrim, I restored the data to a W2K workstation (using Backup Exec 8.6) to another drive. On completion of the restore, BE8.6 logs indicated 13GB of data restore successfully.
When I tried to display the data on the drive, I got "D:\ is not accessible". I displayed the properties of the drive and it indicated "0 bytes used, 0 bytes free". I'm signed on as administrator.

What could be the problem?

 
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question
external hard drive issue
Replies
13
Views
3K
DrB0b
DrB0b
Martha_SysAdm
  • Locked
  • Question
Which hardware and software can i consider for Backup and Disaster recovery 1
Replies
3
Views
667
goombawaho
goombawaho
Kennymc
  • Locked
  • Question
backup exec
Replies
0
Views
446
Kennymc
Kennymc
Marino.
  • Locked
  • Question
Restore backup in Open VMS
Replies
0
Views
507
Marino.
Marino.
Kennymc
  • Locked
  • Question
HP 448 uthrium driver
Replies
0
Views
551
Kennymc
Kennymc

Part and Inventory Search

Sponsor

Back
Top