backing up a BCM400 3.7

[adamandamy]

Trying to perform a backup a BCM 3.7 prior to a 4.0 upgrade. Whenever I try to perform backup I receieve the following error:

"Apache Active Scripting Runtime Error

There is not enough space on the disk.
Line #169, Char#5"

I get this error no matter if I'm trying to backup to the BCM itself or a remote network share. This has worked in the past so I'm at a loss.
Any help would be greatly appreciated.

 

[adamandamy]

Just a quick follow up to my previous post, the Line and Char #s are never the same every time I try back the unit up.

 

[56BelAir]

Dont worry about backing up Apache, just do everything else and see what happens?

 

[adamandamy]

did as you suggested with the same result. Also rebooted BCM. The BCM does pass the pre check

 

[telcodog]

Someone probably backed up to the BCM in the past because they couldn't get it to backup to their PC. You will probably find that the E drive is the culprit.

Just go in via the serial port, navigate to the E drive and deleted everything on it. It's just used for temporary storage and for the backups if you do a backup to the BCM. Seen it many times in the past.

Good Luck.

 

[ktludwig]

Do you know if the system is up to date with the patches? I believe there is a patch that corrects that issue.