I have two routers connected back to back. I have configured one router as a DTE device and the other as a DCE. I have frame-Relay switching enabled and the interface is Up Up. I created sub-interfaces on both routers and assigned an /29 IP address to both (in the same subnet) routers. The thing is when I attempt to PING they timeout.
The configs are below : Any help appreciated.
The DTE router:-
shutdown
!
interface Serial0/0
no ip address
encapsulation frame-relay
!
interface Serial0/0.1 point-to-point
ip address 190.1.10.6 255.255.255.248
!
!
line con 0
transport input none
line aux 0
line vty 0 4
password cisco
login
!
end
The DCE router:-
shutdown
!
interface Serial0/0
no ip address
encapsulation frame-relay
clockrate 2000000
frame-relay lmi-type cisco
frame-relay intf-type dce
!
interface Serial0/0.1 point-to-point
ip address 190.1.10.1 255.255.255.248
!
ip classless
no ip http server
!
!
!
!
line con 0
transport input none
line aux 0
line vty 0 4
no login
!
end
Any help appreciated.
Normskin.
The configs are below : Any help appreciated.
The DTE router:-
shutdown
!
interface Serial0/0
no ip address
encapsulation frame-relay
!
interface Serial0/0.1 point-to-point
ip address 190.1.10.6 255.255.255.248
!
!
line con 0
transport input none
line aux 0
line vty 0 4
password cisco
login
!
end
The DCE router:-
shutdown
!
interface Serial0/0
no ip address
encapsulation frame-relay
clockrate 2000000
frame-relay lmi-type cisco
frame-relay intf-type dce
!
interface Serial0/0.1 point-to-point
ip address 190.1.10.1 255.255.255.248
!
ip classless
no ip http server
!
!
!
!
line con 0
transport input none
line aux 0
line vty 0 4
no login
!
end
Any help appreciated.
Normskin.