B149 ON BCM

[koulioumbis]

Hello anyone has used the B149 on BCM?
I need to connect an analog B149 to a BCM50R6. For single calls the device functions OK. How to use for it to add more callers? following the manual does not behave as it is written.
it says while being on first call to press the f (Green) Key, but when pressing it the call is not being on hold in order to hear the PBX dialtone and make the second call.

thanks

Nikos

 

[curlycord]

You are on a BCM so ATA rules also apply so use the ATA guide.

The Green button should act as the Flash/Link/
The Green plus * equals Feature

*3 is Conference (Green then * 3)
2 is hold (Green then 2)

i.e
Feature 70 is transfer on digital
Green * 70 is Transfer on ATA





________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca