[b][u]ISDN TERMINAL[/b][/u]

[rinop]

HI,
i have a "simply" question :

can i assign a dir to isdn terminal for incoming call on the ELU 28/3 with S0 adapter without ringing the digital telephone ? (passing dir)

I will be use an indipendent isdn adapter for incoming calls and contemporarily digital phone

I have initiate the main dir with:

KSEXIIR=XXXX,EQU=X-X-XX-XX,CAT=X,ACCTYP=0;
where X is the appropriate digit

I have prove to set with ITNUI but there are some problem to set it because an errors occured from serv,cdiv,... setting !

P.S. THE SYSTEM IS: MD110,BC11,SP12, MARKET ITALY

Tks

 

[fouesnant]

Hi

In the ADC parameter of the phone, D11 indicate if the 3.1kHz bearer capability call should be passed to DTS or ISDN. Normally Numeric calls should be passed naturally to ISDN.
For Speech Bearer, I don't see how to proceed, because NUTRI will change all bearer's calls.
In the mean time, I don't see the benefit to pass all call to ISDN if you use ELU28/3 with SODASL box....You better use a ELU26.

 

[rinop]

I HAVE RESOLVED ALONE

THANKS THE SAME