[b]DN PROGRAMMING?[/b]

[donhal]

INSTALLED A DOORPHONE (DN 252) TO RING AT 221
ASSIGNED 221 TO ANSWER AT 223,224,225.
WORKS OK FOR THE DOOR BUT WHEN A LINE CALL COMES IN, 223,224 225 RING ON THE CALL. ANY WAY TO PROGRAM THIS SO THESE SETS ONLY ANSWER THE DOOR CALL?
SYSTEM IS A MICS 6.1
THANK YOU
DGH

 

[Serenitynow109]

If you are referring to having an answer DN setup and using that to answer only the door call, no, you can not.

 

[bkrike]

You could set it up another way if your software is new enough- use a hunt group to ring the phones.

PS- all caps is yelling.
http/ tgml tags do not work in titles

 

[Bob3470]

Try having the door phone ring on a phantom set (a local where no set is plugged in) Then have an answer DN key for the phantom set to ring or just flash on each set you want the door phone to be picked up on.