AWC default login 1

[cknipe]

according to the manual it says that the login is the same as your MSL login but thats not working for me...anyone know any other logins used?

After you complete the setup of the communications system platform, configure Audio and Web
Conferencing through the MAS Server Manager.
To log on and configure AWC settings:
1. Open a Web browser, and then type the URL where the MAS server is located (for
example,

https://<hostname>.com).

2. Click Yes at the security prompt. The Application Menu page opens.
3. Click the Server Manager link to open the MAS Server Login page.
4. Type admin (default) for Username, and then type the password that you created when
Mitel Standard Linux (MSL) was installed on the MAS server.
5. Click Login to display the MAS Server Manager main page.
6. Select Audio and Web Conferencing in the navigation pane to open the AWC
Management Console Welcome page.
After you are in the AWC administrator interface, you can access all the AWC
administrator pages from the navigation pane.

 

[kwbMitel]

At what point in the login process is it failing?


*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[cknipe]

From MSL, I click on the AWC link and it brings me to a colorful blue AWC gui that asks for the admin username and password. I typed the same password I used to log into the MSL server console but it does not accept it...says its invalid username/password.

 

[kwbMitel]

I had a similar thing with a nupoint app but it started working for me before I figured out why.

Are you using the Admin / Password or a different one setup in the user table?

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[cknipe]

No im using the admin password MSL makes you create as you are configuring the server (from the blue screens). Im thinking I may have had a version mismatch or something. This all started because I am migrating from MAS 1.0 to MAS 1.2... When I ported that question I had just gotten to MAS 1.1...im just going to complete the upgrade and check again...hopefully I will have a fixed itself scenario like you.

 

[kwbMitel]

Try user name "admin" with password as setup during install.

With a nupoint you have to create a LMHost Entry for DNS. this might be true for AWC but I don't think so.

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[cknipe]

well after upgrading to 1.2 now all is well. It seems like now the AWC gui looks a little more "integrated" into the MSL browser where before the AWC gui seemed like it was its own platform...if that makes any sense. thanks for the help