Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Avaya Workplace Client for Agents (MANUAL SETUP - Without AADS Dynamic Configuration)

Status
Not open for further replies.
Tanzeem97

Tanzeem97

Systems Engineer
Nov 13, 2023
8
CA
thread690-1814486 - Has anyone successfully deployed Workplace Client for Agents manually without dynamic configuration. Trying to setup in LAB and unable to get the login button for Agents
 
Sort by date Sort by votes
You need to enable customer service/agent mode in order to see the login buttons and make sure that you've got a weblm server specified in your config. You will likely also need to admin the phone as a SIPCC type.

 
Upvote 0 Downvote
Yes, I was able to get it working, for testing purpose - I enabled webserver on my machine and used the web address of my machine for workplace client (for 46xx settings and SMGR cert) and it worked
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Egertro
  • Question
Avaya Workplace
Replies
0
Views
67
Egertro
Egertro
ITHawkDriver
  • Locked
  • Question
Avaya workplace on R10 with Zscaler
Replies
0
Views
163
ITHawkDriver
ITHawkDriver
Furrye
  • Locked
  • Question
Call for other CM by Avaya IP Phone 4610sw, ASA Configuration
Replies
1
Views
310
Konri
Konri
Kwick18
  • Locked
  • Question
Avaya Workplace Client - How to show keypad for an active call
Replies
1
Views
210
jimbojimbo
jimbojimbo
M
  • Question
AVAYA 1603SW Firmware for SIP
Replies
0
Views
113
Muller7777
M

Part and Inventory Search

Sponsor

Back
Top