Avaya WAP9103

[LORDxGOLD]

Hello all,
I have a new Avaya WAP9103. Out of the box it should be broadcasting it's avaya SSID. I tried everything that I can but it does not seem to be doing this properly. The configuration looks perfect but none of my devices see any SSIDs I create or enable or modify. I gave some a valid DHCP pool to use, connected to an existing LAN,... nothing. Please help.

 

[derfloh]

IIRC the SSID is active but the radios are not. You can enable them and chose whether to use 2,4GHz or 5GHz per Radio.

 

[bstrain]

Hey Lord - definitely try what derfloh said - by default the radios are off and you will need to go into the radios menu and configure and enable them (2.4/5 and operating mode).

I've deployed several of the 9100 series and would also recommend you use the trial version of WOS - Wireless Orchestration System to configure and monitor the AP's. You can download from support.avaya.com and use it for 30 days before it requires a license key.

Let me know if you still cant get it up and running! Like I said, i've deployed lots of these AP's and sometimes the Web Management system can be a little tricky to navigate.