magesh2019
Systems Engineer
Hi Everyone,
i'm from the cisco , hpe back ground. I'm new to Avaya switch i dont understand most of the commands on avaya how and why this is configured. would be great if one of you can help me explain what does it mean exactly? sorry once again of all my stupid questions please bare with me.
# PORT CONFIGURATION - PHASE I
ethernet 1/2 perform-tagging enable
# STG CONFIGURATION
stg 1 add ports 1/1,1/12,2/1,2/12,3/12,4/11-4/12
stg 1 priority 4000
# PORT CONFIGURATION - PHASE II
ethernet 1/1 untagged-frames-discard enable
ethernet 1/1 default-vlan-id 4200
ethernet 1/1 cp-limit disable multicast-limit 2500 broadcast-limit 5000
ethernet 1/1 enable-diffserv true
ethernet 1/1 name "ERS8600_MTR, p 1/1"
ethernet 1/1 stg 1 stp disable
ethernet 1/1 vlacp macaddress xx:xx:xx:xx:xx
ethernet 1/1 vlacp enable
ethernet 1/1 vlacp slow-periodic-time 10000
ethernet 1/2 default-vlan-id 19
ethernet 1/2 cp-limit enable multicast-limit 2500 broadcast-limit 5000
ethernet 1/2 access-diffserv true
ethernet 1/2 enable-diffserv true
ethernet 1/2 name "WSS_1, p 10"
ethernet 1/2 stg 1 stp disable
ethernet 1/2 smlt 200 create
vlan 21 ip pim enable
vlan 21 ip ospf interface-type passive
vlan 21 ip ospf enable
vlan 21 ip rsmlt enable
vlan 21 ip rsmlt holdup-timer 9000
# R-MODULE FILTER CONFIGURATION
filter act 1 create name "Source_IP_Set"
filter act 1 ip srcIp
filter act 1 apply
filter act 2 create name "WLAN_Time"
filter act 2 ip srcIp,dstIp
filter act 2 protocol tcpSrcPort,udpSrcPort,tcpDstPort,udpDstPort
filter act 2 arp operation
filter act 2 apply
filter act 3 create name "For_PMS"
filter act 3 ip srcIp,dstIp,ipProtoType
filter act 3 protocol tcpDstPort,udpDstPort
filter act 3 arp operation
filter act 3 apply
filter acl 1 create inPort act 1 name "WLAN_VoIP"
filter acl 1 port add 1/2,2/2,3/2,4/2
filter acl 1 ace 1 create name "WLAN_VoIP"
filter acl 1 ace 1 action permit remark-dscp phbef egress-queue 6,62,62 egress-queue-nnsc premium
filter acl 1 ace 1 ip src-ip eq x.x.x.1-x.x.x.2
filter acl 1 ace 1 enable
i'm from the cisco , hpe back ground. I'm new to Avaya switch i dont understand most of the commands on avaya how and why this is configured. would be great if one of you can help me explain what does it mean exactly? sorry once again of all my stupid questions please bare with me.
# PORT CONFIGURATION - PHASE I
ethernet 1/2 perform-tagging enable
# STG CONFIGURATION
stg 1 add ports 1/1,1/12,2/1,2/12,3/12,4/11-4/12
stg 1 priority 4000
# PORT CONFIGURATION - PHASE II
ethernet 1/1 untagged-frames-discard enable
ethernet 1/1 default-vlan-id 4200
ethernet 1/1 cp-limit disable multicast-limit 2500 broadcast-limit 5000
ethernet 1/1 enable-diffserv true
ethernet 1/1 name "ERS8600_MTR, p 1/1"
ethernet 1/1 stg 1 stp disable
ethernet 1/1 vlacp macaddress xx:xx:xx:xx:xx
ethernet 1/1 vlacp enable
ethernet 1/1 vlacp slow-periodic-time 10000
ethernet 1/2 default-vlan-id 19
ethernet 1/2 cp-limit enable multicast-limit 2500 broadcast-limit 5000
ethernet 1/2 access-diffserv true
ethernet 1/2 enable-diffserv true
ethernet 1/2 name "WSS_1, p 10"
ethernet 1/2 stg 1 stp disable
ethernet 1/2 smlt 200 create
vlan 21 ip pim enable
vlan 21 ip ospf interface-type passive
vlan 21 ip ospf enable
vlan 21 ip rsmlt enable
vlan 21 ip rsmlt holdup-timer 9000
# R-MODULE FILTER CONFIGURATION
filter act 1 create name "Source_IP_Set"
filter act 1 ip srcIp
filter act 1 apply
filter act 2 create name "WLAN_Time"
filter act 2 ip srcIp,dstIp
filter act 2 protocol tcpSrcPort,udpSrcPort,tcpDstPort,udpDstPort
filter act 2 arp operation
filter act 2 apply
filter act 3 create name "For_PMS"
filter act 3 ip srcIp,dstIp,ipProtoType
filter act 3 protocol tcpDstPort,udpDstPort
filter act 3 arp operation
filter act 3 apply
filter acl 1 create inPort act 1 name "WLAN_VoIP"
filter acl 1 port add 1/2,2/2,3/2,4/2
filter acl 1 ace 1 create name "WLAN_VoIP"
filter acl 1 ace 1 action permit remark-dscp phbef egress-queue 6,62,62 egress-queue-nnsc premium
filter acl 1 ace 1 ip src-ip eq x.x.x.1-x.x.x.2
filter acl 1 ace 1 enable