Avaya SBCE for SIP Trunk & Workplace 1

[William C290]

Hello ...

I have IPOSE 11.1.3, and SBCE for SIP Trunk & Workspace
When the deployment of the IPOSE, I changed the TCP, UDP, and TLS ports under VOIP settings to 5090, and all the JSeries IP Phones now working using TCP Ports 5090
Now I need to Set up an SIP Trunk, and the provider uses port UDP 5060. Will this affect the SIP trunk, as it uses its port? Should I change it from VOIP Settings? Does this affect JSeries phones if I keep using TCP 5090?
Can I complete the configuration for the remote worker using the same 5090 TCP ports?


Thanks

 

[derfloh]

First of all for remote workers I would use TLS not TCP.

You have to discuss with the carrier if they can send calls to a port different to 5060y usually it’s not a problem. The SBC can use any port you like. You can use 5090 for remote workers and 5092 (or whatever you like) for the SIP trunk.

 

[William C290]

@derfloh: The Problem is that TLS many steps for certificates needed and TCP is easier to implement.