AVAYA S8300D / G450: new CM 5.2.1 installation.

[marjox]

Hi to all.
I try to install a S8300D baord (pull from other field server) on G450.
Connect a laptop with cross cable to Service port + CDROM on USB1 (CM 5.2.1 DVD installation).
The board reboot, GREEN LED Link = ON, but no IP address configured (192.11.13.6).
Some notes:
- installation DVD works fine (we've installed on other S8300D board)
- notebook works fine / cross cable is ok / DVD work fine (we test in other installation).
- we don't know if S8300D board is broken or damaged...
Does anyone can help me ?

thanks in advance.
m.
ps: sorry for my bad english.

 

[montyzummer]

so are you saying you cant ping the services port of the s8300 ??

To me it sounds like its already got a cm version loaded this if cm6 could be the duplicate ip issue if you are using a windows7/8 laptop

try this then even see if you can ping the s8300

http://www.youtube.com/watch?v=lXYzL6iINzE

APSS (SME)
ACSS (SME)
ACIS (UC)

 

[Mlck]

Had same issue with 6.3 install. After the server finish to reboot, reboot your PC. Works for me,.