Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

AVAYA S8300D / G450: board configuration issue (RED LED ALM is ON)

Status
Not open for further replies.

marjox

IS-IT--Management
Aug 28, 2012
21
IT
Hi to all.
I try to install a S8300D borad (pull from other server) on G450.
Connect a laptop with cross cable to Service port + CDROM on USB1 (CM 5.2.1 installation disk).
The board reboot, GREEN LED Link = ON, but no IP address configured (192.11.13.6).
Does anyone can help me ?

thanks in advance.
m.
 
cm5.2.1 install disk is DVD. It won't quit fit on a CD

Installing and Upgrading the Avaya
S8300 Server
555-234-100
Issue 12
May 2009

There are three external CD/DVD-ROM drives that are supported on the S8300
Server:
o Avaya approved Panasonic Digistor 73082 or 73322 (Comcode: 700406267):
- The switch must be turned to the ON position.
- Instead of AC power, the Panasonic Digistor uses a Lithium ION battery for
additional power. The CD/DVD-ROM draws more power than the USB port can supply.
The additional power required is supplied by the Lithium ION battery. If the
Lithium ION battery is depleted, a red LED displays and a failed to mount CD-ROM
message appears. You can charge the Lithium ION battery by plugging the CD-ROM
drive in a USB port for approximately 30 minutes. The Lithium ION battery
charges faster if the ON/OFF switch is set to OFF.

Note:
The functionality of the Lithium ION battery supplying the extra power
that the CD/DVD-ROM needs is only applicable for the original CD/DVD-ROM.
o Addonics (Model: AEPDVRWII824) (not available through Avaya):
- Requires AC power to operate.
- You must have the switch set to External.
o TEAC (end of sale) (Comcode: 700289580)


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Booting from the DVD configures 192.11.13.6 for the services port of the s8300

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top