Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Avaya Prologix and Map 5 Administration
- Thread starter techelp01
- Start date
- Thread starter
- #3
Node Names
Audix audix1 10.10.10.2
IP Clan 10.10.10.1
IP default 0.0.0.0
The current Audix is at a remote site, the remote site is going away and there will just be a local map 5. They are connected by a point to point T1.
"Processer Channel"
Proc Channel- 1
enable - y
appl.- audix
Mode- s
interface link - 1
channel- 5002
node - audix1
port - 0
local - 1
remote - 1
mach- 1
When I hit enter I get a message in ASA, " duplicate of this applacation type is not allowed".
Audix audix1 10.10.10.2
IP Clan 10.10.10.1
IP default 0.0.0.0
The current Audix is at a remote site, the remote site is going away and there will just be a local map 5. They are connected by a point to point T1.
"Processer Channel"
Proc Channel- 1
enable - y
appl.- audix
Mode- s
interface link - 1
channel- 5002
node - audix1
port - 0
local - 1
remote - 1
mach- 1
When I hit enter I get a message in ASA, " duplicate of this applacation type is not allowed".
- Thread starter
- #4
change communication-interface processor-channels Page 1 of 8
PROCESSOR CHANNEL ASSIGNMENT
Proc Gtwy Interface Destination Session Mach
Chan Enable Appl. To Mode Link/Chan Node Port Local/Remote ID
1: y audix s 1 5002 audix1 0 1 1 1
2: n 0
3: n 0
4: n 0
5: n 0
6: n 0
7: n 0
8: n 0
9: n 0
10: n 0
11: n 0
12: n 0
13: n 0
14: n 0
15: n 0
16: n 0
Duplicate of this application type not allowed
PROCESSOR CHANNEL ASSIGNMENT
Proc Gtwy Interface Destination Session Mach
Chan Enable Appl. To Mode Link/Chan Node Port Local/Remote ID
1: y audix s 1 5002 audix1 0 1 1 1
2: n 0
3: n 0
4: n 0
5: n 0
6: n 0
7: n 0
8: n 0
9: n 0
10: n 0
11: n 0
12: n 0
13: n 0
14: n 0
15: n 0
16: n 0
Duplicate of this application type not allowed
- Thread starter
- #5
- Thread starter
- #6
HUNT GROUPS
Grp Grp
No. Name/ Grp ACD/ Que No. Cov Notif/ Dom Message
Ext Type MEAS Vec MCH Siz Mem Path Ctg Adj Ctrl Center
10 Audix
3610 ucd-mia n/- n none 0 0 n R
50 New Audix Columbia MD
3920 ucd-mia n/- n none 0 6 n n
99 Netcon Channels
3990 ucd-mia n/- n none 0 4 n n
Command successfully completed
Command:
Grp Grp
No. Name/ Grp ACD/ Que No. Cov Notif/ Dom Message
Ext Type MEAS Vec MCH Siz Mem Path Ctg Adj Ctrl Center
10 Audix
3610 ucd-mia n/- n none 0 0 n R
50 New Audix Columbia MD
3920 ucd-mia n/- n none 0 6 n n
99 Netcon Channels
3990 ucd-mia n/- n none 0 4 n n
Command successfully completed
Command:
- Thread starter
- #7
INTUITY (TM) Main Menu
ASG Security Administration
AUDIX Administration
Cu TCP/IP Administration
Fe
In Network Addressing
Mi
Ne TCP/IP Interface: eeE_0
Netw Host Name: AUDIX
Soft IP Address: 10.10.10.2
Swit Subnet Mask: 255.255.255.0
Syst Default Gateway Address:
TCP/
Unix
Voic
Web Server Administration
Enter a TCP/IP interface by name. Check CHOICES for available names.
ASG Security Administration
AUDIX Administration
Cu TCP/IP Administration
Fe
In Network Addressing
Mi
Ne TCP/IP Interface: eeE_0
Netw Host Name: AUDIX
Soft IP Address: 10.10.10.2
Swit Subnet Mask: 255.255.255.0
Syst Default Gateway Address:
TCP/
Unix
Voic
Web Server Administration
Enter a TCP/IP interface by name. Check CHOICES for available names.
- Thread starter
- #8
l Local Machine Administration k
x x
x Local Machine Name: local Connection Type: TCP/IP x
x x
x Dial Str:
x
x Data Rate: 19200 Password: crftpw
x x
x Channel: 1 x
mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj
Enter a Connection Type, use <CHOICES> for options
x x
x Local Machine Name: local Connection Type: TCP/IP x
x x
x Dial Str:
x
x Data Rate: 19200 Password: crftpw
x x
x Channel: 1 x
mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj
Enter a Connection Type, use <CHOICES> for options
- Thread starter
- #9
l Networking Administration k
l Networking Channel Administration k
x CHANNEL TYPE RATE STATUS MACHINE ACTIVITY x
x ------- ---- ---- ------ ------- -------- x
x 1 DCP NOT EQUIPPED x
x 2 DCP NOT EQUIPPED x
x 3 DCP NOT EQUIPPED x
x 4 DCP NOT EQUIPPED x
x 5 DCP NOT EQUIPPED x
x 6 DCP NOT EQUIPPED
x 7 DCP NOT EQUIPPED
x 8 DCP NOT EQUIPPED
x 9 DCP NOT EQUIPPED x
x 10 DCP NOT EQUIPPED x
x 11 DCP NOT EQUIPPED x
x 12 DCP NOT EQUIPPED x
x x
x x
x x
mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj
I would check your ethernet speedduplex settings. If the Audix is directly connected via a crossover cable to the CLAN then 10/Half can work, if you are on a LAN switch, I would tend to lock both the Audix and CLAN to 100MB/Full, to do that you will need a TN799DP, and you need to set it to 100F, same in the audix.
My guess, you can't ping between the 2 devices, give it a try, verify you have IP connectivity.
Mitch
AVAYA Certified Expert
My guess, you can't ping between the 2 devices, give it a try, verify you have IP connectivity.
Mitch
AVAYA Certified Expert
- Thread starter
- #11
- Status
