Avaya Partner ACS Bridge Appearance 1

[Antaew]

I'm trying to put 2 bridge appearance buttons on extension 10. Does anyone know what the code is. I know its not labeled bridge appearance on the Partner, but i trying to do the same thing. Please let me know.

Thanks

 

[TouchToneTommy]

There are no bridged appearances in a Partner system. Explain further what you need to do, and perhaps there is a work around.

 

[Antaew]

Basically, i'm looking to program 2 extensions to illuninate on extension 10 when they're on the phone. I don't see a cose which will allow that.

Thanks

 

[TouchToneTommy]

Just put an Auto Intercom button on Ext. 10, the light next to the button will show when they are on the phone, as well as give you one-touch access to call them.

Feature 00
Press the button to be programmed
Press the Left Hand Intercom button and dial the extension number
Press the next button, or press Feature 00 to exit

(If you use VOICE ANNOUNCE Intercom calls, press * before the extension number)

 

[Antaew]

Thank You for your help. I was making it more difficult than it should of been..

 

[smokinjoe2938]

have somE pink TTT