The thread, thread690-1112488 asked about using the "list trace station extension/button" command, but the user wasn't sure as to the button numbering scheme. Even in the modern Communication Manager releases, this works, and the button numbering starts at 7. That means the first button of the phone can be pressed by entering extension/7, and each button after that is that button's number plus 6 (7, 8, 9 for buttons 1, 2, 3, etc). So, for example, if the Send All Calls button on extension 2140 is button 4, then it's button 10 according to list trace, so you would enter "list trace station 2140/10" to push the Send All Calls button and turn it off.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Avaya List Trace Command with button pushing
- Thread starter solrosin
- Start date
- Status
- Status
Similar threads
