Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
AVAYA IPO R11 SBCE SIP TRUNK
- Thread starter Craft01
- Start date
Yes. IPO sees the connection between IPO and SBC. To see the Trunk status you have to go on the SBC and check Status-Server in the top menu bar.
IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN
IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN
- Thread starter
- #3
Then you have to check the server configuration.
IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN
IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN
- Thread starter
- #6
I get this errors:
818238327450929 Nov 9, 2021 5:50:54 PM TLS Certificate TLS Handshake Failed error:14090086:SSL routines:ssl3_get_server_certificate:certificate verify failed
818238327450746 Nov 9, 2021 5:50:54 PM TLS Certificate TLS Handshake Failed self signed certificate
I think I have a problem with the Generating an identity certificate for the ASBCE
According to the document [pre]IP Office SIP Phones with ASBCE[/pre] the Procedure is as follows
1. Login to the IP Office Web Control menus by either:
• From within IP Office Web Manager, select the primary server. Click on and select
Platform View.
• Browse to Office IP address>:7071 and login as the
Administrator.
2. Go to Settings tab and scroll down to Certificates.
3. Check Create certificate for a different machine.
4. Enter the following data:
a. In Machine IP enter the external IP address of the ASBCE.
b. In Password enter a password to encrypt the certificate and key.
Note:
Note that if any special characters are used in the password, to enter that
password at the command line requires the character to be prefixed with a \. For
example, a @ in the password would be typed as \@ at the command line.
c. In Subject Name enter the FQDN of the ASBCE.
d. In Subject Alternative Name(s) enter comma separate values for the DNS:<FQDN>
and IP:<IP address>.
Her In Subject Alternative Name(s) in IP:<IP address>, should I put external IP address as in 2.a.?????
818238327450929 Nov 9, 2021 5:50:54 PM TLS Certificate TLS Handshake Failed error:14090086:SSL routines:ssl3_get_server_certificate:certificate verify failed
818238327450746 Nov 9, 2021 5:50:54 PM TLS Certificate TLS Handshake Failed self signed certificate
I think I have a problem with the Generating an identity certificate for the ASBCE
According to the document [pre]IP Office SIP Phones with ASBCE[/pre] the Procedure is as follows
1. Login to the IP Office Web Control menus by either:
• From within IP Office Web Manager, select the primary server. Click on and select
Platform View.
• Browse to Office IP address>:7071 and login as the
Administrator.
2. Go to Settings tab and scroll down to Certificates.
3. Check Create certificate for a different machine.
4. Enter the following data:
a. In Machine IP enter the external IP address of the ASBCE.
b. In Password enter a password to encrypt the certificate and key.
Note:
Note that if any special characters are used in the password, to enter that
password at the command line requires the character to be prefixed with a \. For
example, a @ in the password would be typed as \@ at the command line.
c. In Subject Name enter the FQDN of the ASBCE.
d. In Subject Alternative Name(s) enter comma separate values for the DNS:<FQDN>
and IP:<IP address>.
Her In Subject Alternative Name(s) in IP:<IP address>, should I put external IP address as in 2.a.?????
- Status
Similar threads
- Locked
- Question