Avaya IPO and Ericsson via PRI QSIG

[PeterG911]

Hi ...

Has anyone tried to connect an IPO and an Ericsson via qsig ?
My Customer have 2 Ericsson PBX at the different site and currently using TDM, the customer tell me that each PBX have PRI using Qsig.
Now the customer went to move on of these site to IPO, it's my first time to configure qsig, it's easiest way, I have some question in order to be in safe side:

1. whats the difference between QSIGA and QSIGB
2. whats the kind of cable used in connection to TDM, straight or crossover
3. is the Networking license is required in this implementation?
4. what I have to tell Ericsson side to do, or nothing since is alreay configured, note that i will kept every thing same as ericsson
programmed.


any advice would be helpful

 

[xs650]

Which Ericsson PBX do you have?

 

[eats4treats]

Hi

Make the IP OFfice the MAster system and the LG the Slave system. Keep the LG Programming the same. Make sure the numbering plan is different and extensons/hunts etc are different too. Maybe use * plus feature code on LG. I had a normal cat5 lead and changed the end as per the networking manual. Cant remember off hand what airs I swapped over on one end.

1 x QSIG Networking license for the LG system and the relevant license for the Avaya.

Ok, Press Trans *#..... TRANS/PGM..... the transfer key?.......sigh!