gmacdonald78
Programmer
We have a site that has an IP500 on R11 with a physical SBC, we have both the SIP and remote users using the same internal interface which I know is not best practice (not installed by me) and due to lots of users putting in the wrong passwords on their Equinox apps eventually leads to the internal SBC address getting blacklisted which causes no end off issues.
We are going to move the remote users away from the SIP trunks and use 2 internal addresses which will negate the SIP trunks outbound calls failing when the remote users internal address gets blacklisted but it’s still going to stop all the remote users from logging in.
Anyone had experience of this and how did you resolve it?
We are going to move the remote users away from the SIP trunks and use 2 internal addresses which will negate the SIP trunks outbound calls failing when the remote users internal address gets blacklisted but it’s still going to stop all the remote users from logging in.
Anyone had experience of this and how did you resolve it?