Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Avaya IP406

Status
Not open for further replies.

Maakus

MIS
Jul 31, 2013
13
JM
All, just inherited an Avaya ip406 DS. This system is fairly new to me, I have work with Cisco UC520 before.
1. When calling out, there is sometimes a delay of about 9 seconds before the call connects
2. When calling in, the caller hears at least 3 rings BEFORE the destination rings once
3. Calls to international numbers only ring local, even though ARS is configured as follows: 0N; / 0N / Dial 3K1 / 0

Can you please help me on this ....

THX
 
1) You need to adjust your shortcodes (analogue lines I assume)
2) It's waiting for caller ID, if it isn't on the lines turn it off for the line ports (again, analogue line I assume)
3) Ring tone is played to the system by your lines/provider/destination, it's not generated by the system on outgoing/external calls :)



"No problem monkey socks
 
No you are not :)
Are you sure you want to use the 406 as this is old and end of sale for a while already.


BAZINGA!

I'm not insane, my mother had me tested!

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top