AVAYA IP PHONES INSTALL 2

[senibiau77]

Hi Everyone,

I have a customer who is running on IP500V2 Rel 8. Ihe main control unit i have 2 x Combo Card, 2 x Analog exension card with BRI and PRI as daugther cards.

1 x16port trunk module
2 x 24port POTS module

I wanted to install 18 IP Phones from this setup. Apart from the IP Endpoints license and IP Phones, is there anything else i need?

Thank you all in advance

 

[intrigrant]

Knowledge, patience, PoE, Vlan, coffee or tea, patch cords, manager app, maybe more.....

A simple mind delivers great solutions

 

[Westi]

no you are good to go, all you need is IP endpoint licenses (you have) the phones (you also have) and VCM channels (20 channels for 18 phones is plenty
a good network is helpful but that is self explanatory for IP sets

Joe W.

FHandw, ACSS (SME), ACIS (SME)

http://convergednetworks.ca

There are 10 types of people in the world: Those who understand binary, and those who don't

 

[atcom]

You should really install a POE switch as well so as not to require power supplies at each phone...

-----------------------------------
Telephone & computer wiring/Cat 5E/Cat 6/Fibre Optic cabling in Calgary, AB

 

[intrigrant]

And use VLANs preferrably, set LAN1 to the data network and LAN2 to the voice network. Use the best codec possible, by default IP Office will use G.729 but set it fixed to G.711.

A simple mind delivers great solutions