Ok, I'm hoping someone can set me straight.
Now I'm trying to set up remote syslog / debug. I was under the impression I could configure Sys Log server and log level in the 46xxsettings file using the following. However the log level never seems to change on the phone, I have to change that manually and no matter what level I set it to all I get is "one" NOTIFY message on the Sys Log Server. I then found the DEBUG under Craft Procedures. I enabled that, it rebooted it came back up and I selected "Send report to server" but that eventually said Backup Failed. I'm trying to get real time or as close to real time debugs/syslogs from the phones. Please point me in the right direction if I've gone astray.
SET LOGSRVR 10.X.234.X
SET LOGLOCAL 8
I read that the DEBUG sends the info to the server listed in the SET BRURI. I set that up and my regular BACKUPS of phone data works, I see it in the file I have specified. However when I do the DEBUGS they fail. I see in the logs where the request is hitting the server but don't see any reject or error message.
SET BRURI
MV_IPTel_Setup log file
2012-09-26T16:41:33---HTTP Other Command:- PUT ; HTTP Version:- HTTP/1.1
2012-09-26T16:41:33---HTTP data:- /PhoneBackup/41455_report.tgz
2012-09-26T16:48:58---HTTP Other Command:- PUT ; HTTP Version:- HTTP/1.1
2012-09-26T16:48:58---HTTP data:- /PhoneBackup/41455_96xxdata.txt
2012-09-26T16:48:58---HTTP CommandOther Continue
2012-09-26T16:48:58---HTTP PUT file created - C:\Program Files (x86)\Avaya\MV_IPTel\data\HTTPdata\PhoneBackup\41455_96xxdata.txt ; Length = 1046
2012-09-26T16:48:58---HTTP CommandOther Done Ok
Now I'm trying to set up remote syslog / debug. I was under the impression I could configure Sys Log server and log level in the 46xxsettings file using the following. However the log level never seems to change on the phone, I have to change that manually and no matter what level I set it to all I get is "one" NOTIFY message on the Sys Log Server. I then found the DEBUG under Craft Procedures. I enabled that, it rebooted it came back up and I selected "Send report to server" but that eventually said Backup Failed. I'm trying to get real time or as close to real time debugs/syslogs from the phones. Please point me in the right direction if I've gone astray.
SET LOGSRVR 10.X.234.X
SET LOGLOCAL 8
I read that the DEBUG sends the info to the server listed in the SET BRURI. I set that up and my regular BACKUPS of phone data works, I see it in the file I have specified. However when I do the DEBUGS they fail. I see in the logs where the request is hitting the server but don't see any reject or error message.
SET BRURI
MV_IPTel_Setup log file
2012-09-26T16:41:33---HTTP Other Command:- PUT ; HTTP Version:- HTTP/1.1
2012-09-26T16:41:33---HTTP data:- /PhoneBackup/41455_report.tgz
2012-09-26T16:48:58---HTTP Other Command:- PUT ; HTTP Version:- HTTP/1.1
2012-09-26T16:48:58---HTTP data:- /PhoneBackup/41455_96xxdata.txt
2012-09-26T16:48:58---HTTP CommandOther Continue
2012-09-26T16:48:58---HTTP PUT file created - C:\Program Files (x86)\Avaya\MV_IPTel\data\HTTPdata\PhoneBackup\41455_96xxdata.txt ; Length = 1046
2012-09-26T16:48:58---HTTP CommandOther Done Ok
So a non-VPN phone works as designed. However with a VPN phone I receive a syslog message but it happens once every twenty minutes and it looks like this,