Avaya IP office - passing DNIS / ANI

[LucP]

Hi,
I have a PRI connected on my ip office and an analog receiver waiting for DNIS / ANI for accept the call.
so I send the DID to a hunt group, where my receiver is in it.
if the DNIS isn't showing properly, the receiver drop the call.

here is what the receiver should receive :

<DNIS>T<ANI>T format, where T=terminator digit (any hex digit B - F)
<ANI>T<DNIS>T format, where T=terminator digit (any hex digit B - F)

I don't know whats the avaya ip format.. is there a way to see that information (call monitor filter maybe? )

Thanks!

Luc