Avaya Ip office , DMS 100

[joezzz]

Hi Guys,

I have an Ip Office with an E1 R2 circuit as the main trunks to it coming from a Nortel DMS100 switch.A few of the circuits on the E1 are set to NOCLI so that customers with their caller ID withheld will not show on the avaya Ip office set display.However, when a withheld caller calls in to the avaya Ip Office the the calls drop with a fast busy tone immediately, if this E1 is connected to a BCM450,400 etc it works and the set displays restricted caller.Is there anything on the avaya IP office that needs to be tweaked to have the withheld calls terminate on the avaya extns and show up as restricted?


thanks much

 

[joe2938]

change them all back to caller id, if someone is blocking their id it not gonna show anyways