AVAYA IP office Dial Out Over SCN. 2

[Imran555]

Hi
at one of our client site we have AVAYA IPO and t remote also IPO with SCN working Fine.
at remote site the IPO Is connected to Ericsson with PRI E1/T1 Card link is fine and working
the remote IPO is just medium between MAIN SITE IPO to Remote Ericson.
at ercisson we we have extension numbering from 1000 2000 3000 and same numbering plan at main site.
from remote ericson we are able to dial to main site extensions.
at main site we have short code to dial remote site 97xxxx/n/10
now the issue for exmple at main site we have 1001 extension and so as at remote site.
when we dial 971001 it will dial local extension.
but if we dial 971200 call gets through because we don't have 1200 at main site.
so any suggestion about short codes.


Regards

 

[Okkie26]

at main site, change shortcode to 97xxxx/./10

Then in remote IPO, add shortcode 97xxxx/n/11 (assuming 11 is trunk ID to ericsson).

 

[Imran555]

do i need to define the above short codes in SCN Trunk Voip Line or at user shortscodes

 

[Okkie26]

non of the above.

At the default shortcode.

 

[Imran555]

Thanka i will try as above.

 

[Imran555]

Thanks It Works

 

[Westi]

Star???

Joe W.

FHandw, ACSS (SME)


"This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter

 

[Westi]

Ok
I give you the star Okkie26

Joe W.

FHandw, ACSS (SME)


"This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter

 

[Okkie26]

Tnx Westi...